ENEC 200w Modular Design Outdoor Street Light

This is a modular design of Outdoor Street Light. The advantage of this design is that the damage of a single module will not affect the normal use of other modules, which is convenient for maintenance and has a high-cost performance. Vertical and horizontal installation are both available, adjustable by ±15° in both directions.

Inquire Now Produit suivant

PRODUCT VIDEO

PRODUCT DESCRIPTION

Key Features

1. Wide power range: 35W~320W.

2. Special circuit design, single LED damage won't affect others' normal work.

3. Modular design and tool-less open for easy replacement and maintenance.

4. Power-off protection makes the power automatically off when the fixture is opened (optional).

5. Level bubble makes it easy for the installer to adjust the position of the lamp.

6. Breather ensures air balance inside and outside of the driver box of the lamp.

7. High Lumen output up to 165lm/ w with high-quality LED chips.

8. 1000 hours salt spray test report.

9. Vertical and horizontal installation are both available, adjustable by ±15°in both directions.

10. Multiple lighting control options are available, e.g. DALI, 1-10V, photocell, and motion sensor.

11. Designed to last at least 100, 000 hours at L70.

12. Multiple lighting distributions are available.

13. CE,ROHS,GS,CB,UL,DLC,LM79,LM80,FCC,IP66,IK10

14. 7 years warranty

Specifications

Model	ZGSM-LD200H4
LED Brand	Lumileds 3030/5050
Driver Brand	Meanwell or Inventronics
Normal Wattage	200W
LED Module Quantity	5 modules
Input Voltage	100-240/277VAC
Power Efficiency	>90%
Power Factor	>0.95
Lamp Rated Luminous Efficiency	140-165 lm/w
Lamp Rated Lumen output	28000-33000 lm (Lumen tolerance +/- 5%)
Color Rendering Index	70( 80 optional）
Color Temperature	3000K or 4000K or 5000K or 5700K
Photometric Type	Type I Medium; Type II Medium; Type III Medium, TypeV, Short
Optimal Operating Temperature	25°
Storage Temperatures	-40°C~50°C
Working Environment	Between-40°C~+50°C, 10%~90%RH
Total Harmonic Distortion	< 10%
Lumen Maintenance	> 100000 hours -L70, @25 ºC (77 ºF)
Wind Index	Force 12
Body	Die-cast Aluminum Housing
Cover	PC lens
Pole Fitter Diameter	60mm ( 50mm optional)
Rating	IP66 IK10
Protection	Class I ( Class II optional)
SPD	10KV (20KV optional)
Certification	CE,ROHS,ENEC,CB,LM80,LM79,FCC,IP66,IK10
Dimming Options	1-10V or DALI or PWM or Timer
Control Options	Photocell or Motion sensor or Smart control
Color Options	Silver or Black
Warranty	7 years

FAQ

1. What is the voltage of the street lamp?

The most common street lamp operating voltage is 120 volts (62%), followed by 240 volts (28%). The majority of entities (82%) that own street lights use a separate photocell to control the on/off function of the street light.

2. Are LED street lights better than sodium lamps?

How do LED street lights compare to high-pressure sodium street lights?

Sodium vapor bulbs contain metals that evaporate into inert gases in a glass enclosure, and LEDs are a solid-state technology. Both techniques are very effective. The difference is that sodium vapor lamps were the most effective techniques of the 1970s, while LEDs are the modern equivalent.

3. What is SPD?

SPD in LED lighting area usually means Surge Proection Device. It's a device or appliance that protects electrical equipment against voltage spikes in alternating current (AC) circuits. A voltage spike is a brief transient occurrence that can reach over 1,000 volts and lasts 1 to 30 microseconds. Lightning can generate a spike in voltage of over 100,000 volts, which can burn through wiring insulation and cause fires, but even small spikes can harm a wide range of electrical items, including computers, battery chargers, modems, and televisions. The surge device will typically activate at a predetermined voltage, usually 3 to 4 times the mains voltage, and divert the current to earth. The surge may be absorbed by some gadgets and released as heat.