Full Die Cast Housing 60w LED Street Light

Full die-cast Housing 60w LED Street Light is designed for residential and local streets, main roads, intersections, crosswalks, alleys, and sidewalks. The tool-less opening design facilitates installation and maintenance, Vertical and horizontal installation are both available and adjustable by ±15° in both directions, which makes LED street lights could illuminate the right area when installation.

Inquire Now Produit suivant

PRODUCT VIDEO

PRODUCT DESCRIPTION

Key Features

1. Wide power range: 25W~200W.

2. Special circuit design, single LED damage won't affect others' normal work.

3. Tool-less open for easy installation, replacement, and maintenance.

4. Power-off protection makes the power automatically off when the fixture is opened.

5. Smooth body would greatly diminish dust accumulation and bird droppings heap up.

6. Level bubble makes it easy for the installer to adjust the position of the lamp.

7. High Lumen output up to 150lm/ w with high-quality LED chips.

8. Pass the 1000-hour salt spray test.

9. Vertical and horizontal installation are both available, adjustable by ±15° in both directions.

10. Multiple lighting control options are available, e.g. DALI, 1-10V, photocell, and motion sensor.

11. Designed to last at least 100, 000 hours at L70.

12. Multiple lighting distributions are available.

13. ENEC/ CB/ CE/ RoHS/ IK08 /IP66 /LM79

14. 7 years limited warranty available.

Specifications

Model	ZGSM-LD60KM
LED Brand	LUMILEDS® LUXEON 3030 or 5050
Driver Brand	Meanwell HLG series/ Inventronics
Normal Wattage	60W
LED Chip Quantity	3030: 96pcs 5050: 48pcs
Input Voltage	100-240/277VAC
Power Efficiency	>90%
Power Factor	>0.95
Lamp Rated Luminous Efficiency	130-150 lm /w
Lamp Rated Lumen output	7800-9000 lm (Lumen tolerance +/- 5%)
Color Rendering Index	70(80 optional)
Color Temperature	3000K or 4000K or 5000K or 5700K
Photometric Type	Type I Medium; Type II Medium; Type III Medium
Optimal Operating Temperature	25℃
Storage Temperatures	-40°C~50°C
Working Environment	Between-40°C~+50°C, 10%~90%RH
Total Harmonic Distortion	< 10%
Lumen Maintenance	> 100,000 hours -L70, @25 ºC (77 ºF)
Wind Index	Force 12
Body and Shell Materials	Die-cast aluminum; Tempered Glass
Pole Fitter Diameter	60mm ( 50mm optional)
Rating	IP66 IK08
Protection	Class I ( Class II optional)
SPD	10KV (20KV optional)
Certification	CE, ENEC,CB,ROHS,LM-80,LM79,ISTMT,IP66,IK08
Dimming Options	1-10V or DALI or PWM or Timer
Control Options	Photocell or Motion sensor or Smart control
Color Options	Deep grey or Light grey
Warranty	7 years

FAQ

1. Why is aluminum used in die casting?

Aluminum die-cast alloys are lightweight and have high dimensional stability for complex part geometries and thin walls. Aluminum has good corrosion resistance and mechanical properties as well as high thermal and electrical conductivity, making it a good alloy for die casting.

2. How to choose a street lamp?

Consumers should not buy products based on the energy consumed (watts) but should consider how much light (lumens) they provide us with. Wattage is a measure of a light bulb's energy consumption, not the amount of light it emits. Energy-saving bulbs use fewer watts to emit the same brightness (lumens).

ZGSM has a pre-sales team including sales and lighting experts. If you don't know how to choose LED lighting products, welcome to contact us for professional advice.

3. Is there an industry standard for street lighting?

For the design, manufacture, and distribution of products, there are standards that have been established by international and regional standardization bodies like CIE, IES, and CEN that are widely regarded as industry best practices. The LED lights manufacured by ZGSM are CE, RoHS, CB, UL, DLC, SAA, ENEC certified. The lighting solutions we provide meet the requirements of these standard.